Centrifugal Compressor Demonstration Unit Demonstrational Equipment Vocational Training Equipment Fluid Mechanics Lab Equipment

Name: Centrifugal Compressor Demonstration Unit Demonstrational Equipment Vocational Training Equipment Fluid Mechanics Lab Equipment
Brand: sdafit.com
SKU: FM42
Availability: InStock
Rating: 5 (1 reviews)

Item No.: FM42

INQUIRY

Description

FM42 Centrifugal Compressor Demonstration Unit Demonstrational Equipment Vocational Training Equipment Fluid Mechanics Lab Equipment

DESCRIPTION
A motor driven multi-stage centrifugal compressor mounted on a stainless steel plinth with transparent air inlet and air outlet ducts. A manually operated adjustable aperture allows the air flow rate to be varied at constant fan speed. A calibrated orifice plate is used on the discharge to measure the air flow rate.
Electronic sensors measure the pressure head developed across the blower, the pressure across the orifice plate (and hence the flow rate) and the air temperature.
The compressor speed is accurately controlled by an advanced electronic inverter within the IFD7 (an essential accessory). This inverter also calculates the torque produced at the motor drive shaft allowing the power used by the fan to be derived. The IFD7 also provides the conditioning electronics for the sensors and allows their readings to be displayed on the computer software.

Multi-stage compressors are used industrially for high pressure deliveries of gas flows or suction duties.
The kinetic energy imparted to the gas by the impeller rotation is converted into pressure energy which progressively increases from stage to stage.
TECHNICAL SPECIFICATIONS
Max flow rate: 20 l/s typical
Max head: 6.0kPa
Max fan speed: 3,000rpm
Motor power rating: 250W
Number of stages: 7
Pressure sensor: 0 to 12.5mBar